Get a quote
Fitting, repairs & prices

Security door and gate prices in 2026, and free quotes

A free quote from security door manufacturers and installers across South Africa. One measuring sheet, no obligation.

900 x 2100
A matt black steel security door fitted on a face-brick house, shown with its kick panel and vertical bars
Material
Mild steel tube, bars from 12 to 16 mm
Sizes
Single doors 813 to 1,000 x 2,100 mm
Locking
Slamlock, cylinder or multi-point lock
Finish
Powder coat, galvanised on the coast
Lead time
Made to measure in 5 to 10 working days
Tag SV-04

Security door and gate prices vary widely because almost every one is built to the opening. This page gives rough 2026 rand ranges for the usual sizes and types, supplied and fitted, and explains what moves a quote up or down. Use the figures to judge whether a quote is reasonable, then send us your sizes and area. Manufacturers and installers near you will quote directly, and you can compare them side by side.

Typical prices by item

These are rough guides for powder-coated mild steel, supplied and fitted, in a standard town or city:

  • Single hinged security door, 813 to 900 x 2,032 to 2,100 mm: R3,500 to R8,500
  • Door with solid kick panel and mesh: R4,800 to R10,500
  • Trellis door, about 900 x 2,100 mm: R3,000 to R7,000
  • Double security door, about 1,600 x 2,100 mm: R7,500 to R16,000
  • Sliding door security gate, 1,800 to 3,000 mm wide: R5,500 to R14,000
  • Expanding gate for a patio, about 2,000 x 2,100 mm: R4,500 to R9,500

The lower end is plain bars, the upper end heavier steel, solid panels and a better lock. Heavy double gates for yards and stores are priced on steel weight and are quoted separately.

Prices include VAT and fitting in a main centre. A job outside town, or one that needs scaffolding or a bakkie full of anchors for a high wall, can add R300 to R1,200 for travel and access.

What drives the price

Four things matter most. First, size: a wide opening needs more steel and stronger frames. Second, steel thickness: 16 mm bars on 25 x 25 mm tube cost more than lighter sections. Third, finish: galvanising under the powder coat adds roughly 10 to 20 percent but is worth it near the sea. Fourth, lock and fittings: a basic lock is cheap, a multi-point set is not. See security door locks for options.

Work on site adds to the total: removing an old gate, fixing into a crooked frame, making good plaster and travel to a remote area.

Shop-bought or made to measure

Large hardware chains such as Cashbuild, Builders or Makro stock ready-made gates in common sizes. They suit standard openings and a tight budget, and you fit them yourself or pay a handyman. A made-to-measure door costs more, but it fills your exact opening, can be built heavier and is usually fitted with proper anchors. If your opening is non-standard, an off-the-shelf gate often needs cutting and adjusting, which cancels the saving.

Comparing quotes fairly

Ask each supplier to quote the same specification: steel sizes, finish, lock, fixing method, guarantee and lead time. A low price that leaves out installation or the lock is not a saving. Quotes are usually valid for 14 to 30 days because steel prices move, and a deposit of about half is normal for made-to-measure work. Look for the number of anchor bolts, whether welds are continuous and whether the quote includes making good. For a complete job, read security door installation, and for a general overview see security doors.

What to include in your request

  • Width and height of each opening in mm
  • Door or gate type: hinged, trellis, sliding or expanding
  • Steel finish and whether you are near the sea
  • Whether installation and removal of old gates is needed
  • Budget range, so suppliers can offer a fitting option

Security Door Prices for different properties

  • Houses: a single steel door at the front and a lighter trellis door at the back
  • Townhouses and complexes: a patio sliding gate and a front door in the complex colour, priced per opening
  • Flats and apartments: one entrance gate at the lower end of the price range
  • Farms and smallholdings: heavy doors for houses and stores, with travel and galvanising adding to the total
  • Shops and restaurants: a folding shopfront gate and a steel back door, priced by width
  • Offices and practices: neat doors at reception and a stronger door for the server room
  • Factories and warehouses: double steel doors and heavy gates priced on steel weight
  • Schools, clinics and churches: bulk door orders priced on a specification, often through a tender

Frequently asked questions

What is the cheapest way to get a security door?
A standard-size door in lighter steel, fitted without extras, sits at the bottom of the range. Compare at least three quotes on the same specification, and avoid skipping galvanising if you are near the coast.
Does the price include installation?
The ranges above do. Some suppliers quote the door alone, so check whether fitting, anchors, travel and removing the old gate are included before you compare totals.
Why do two quotes for the same size differ so much?
Usually steel thickness, finish, lock quality and how the door is fixed differ. A heavier frame with deeper anchors and galvanising can cost double a light, painted one.
Do prices go up in coastal areas?
Slightly, because suppliers recommend galvanising or stainless fittings against salt air, and travel can add cost. The extra protection usually pays for itself in longer life.

Security Door Prices by province and city

More doors, gates and bars

Security doorsSteel security doors, trellis doors, retractable doors and solid steel doors with frames

Security gatesSecurity gates, expanding gates, slamlock gates, sliding door gates and front door gates

Burglar barsBurglar bars for windows, aluminium windows and doors, clear bars and decorative designs

Fitting, repairs & pricesInstallation, gate repairs, locks, price guides and gates for sale

Get a free security door quote

Fill in the measuring sheet: each door, gate or window with its width and height in millimetres, the finish you want and how it should be fixed. Manufacturers, installers and locksmiths who work in your area quote you directly. Free, no obligation.

Measuring sheetSheet no. assigned when sent

Openings

No.Door, gate or windowWidth mmHeight mmQtyRemove
O1
O2
Up to 12 lines. Measure inside the frame; not sure? Leave the size empty.

Add a width and height in millimetres to see the openings to scale, the total area and a rough price.

Options and problems

Free and no obligation. By sending you agree that we may share your request with a suitable manufacturer, installer or supplier. See our privacy policy.

Get a free quote