Get a quote
Free tool

Security door and gate cost calculator

Enter each door, gate or window with its size in millimetres and get a rough 2026 price range, supplied and fitted, with the extras that push it up or down.

900 x 2100
A black steel security door fitted at the front door of a South African house
Estimate sheet2026 rates, supplied and fitted
Door, gate or windowTypeWidth mmHeight mmQtyRemove
Sizes in millimetres, measured across the opening.
Extras
Rough totalR0

A rough 2026 guide for standard work, not a quote. Your installer measures and confirms on site.

Most security door and gate prices in South Africa are worked out per square metre of opening, then adjusted for the lock, the finish, removal of old gates and travel. This calculator uses the same rough rates installers use, so you can set a budget before anyone comes to measure.

How the estimate is worked out

Each line is the width times the height of the opening in square metres, times a low and a high rate per square metre for that kind of door, gate or bar. A small item never comes out below a minimum charge, because cutting, welding, painting and a trip to site cost about the same for a small window as for a big one. The extras you tick are added on top, either as a percentage (galvanising, a colour other than black, an upper floor) or as a fixed amount per item (lock upgrades, removing an old gate) or per job (travel).

The rates are a 2026 guide for standard mild steel work, powder coated and fitted with anchor bolts. They are not a quote. A workshop that measures your openings will price the actual steel, lock and fitting.

What makes a security door cost more

  • Heavier steel. A 25 x 25 mm frame with 16 mm bars costs more than a 20 x 20 mm frame with 12 mm bars, and it is much harder to force.
  • The lock. A basic 3-lever lock is cheapest; a slam lock, a lock box with a pick-resistant cylinder or a keyed-alike set adds R450 to R1,600 a door.
  • Galvanising under the powder coat. Worth it within about 50 km of the sea, where plain steel starts to rust at the welds within a few years.
  • Odd sizes and shapes. Arched tops, double doors, patio stackers and openings over 2,400 mm high take more steel and time.
  • Access. Upper floors, long carries and complexes with strict working hours add labour.

Use the estimate to get better quotes

Once you are happy with the list, press Use these sizes in a quote request. Your openings drop into the measuring sheet below, so the installers who quote see the same sizes you priced. If a quote comes in far above the high figure, ask what is different: thicker steel, a better lock or work you didn't ask for. If it comes in far below the low figure, ask about the steel sizes, galvanising and how the frame is fixed to the wall. See security door prices and burglar bar prices for more detail.

Frequently asked questions

How accurate is the calculator?
It gives a range, not a price. Most quotes for standard work land inside it, but the steel, lock, finish, wall type and travel can move a real quote above or below. Use it to budget and to spot quotes that are far off.
Does the price include VAT?
The rates are what homeowners are typically quoted, which for VAT-registered companies includes VAT. Small workshops that are not registered for VAT don't charge it. Always ask whether a quote includes VAT.
Why is there a minimum charge?
Measuring, cutting, welding, powder coating and a trip to fit cost nearly the same for a 600 mm window as for a large one, so most workshops have a minimum of roughly R1,500 for a door or gate and R450 to R650 for a small window.
Is a security gate cheaper than a security door?
Usually yes. An open-bar slamlock or trellis gate uses less steel than a security door with a solid kick panel. See security gates and security doors for the differences.

More free tools

Get a free security door quote

Fill in the measuring sheet: each door, gate or window with its width and height in millimetres, the finish you want and how it should be fixed. Manufacturers, installers and locksmiths who work in your area quote you directly. Free, no obligation.

Measuring sheetSheet no. assigned when sent

Openings

No.Door, gate or windowWidth mmHeight mmQtyRemove
O1
O2
Up to 12 lines. Measure inside the frame; not sure? Leave the size empty.

Add a width and height in millimetres to see the openings to scale, the total area and a rough price.

Options and problems

Free and no obligation. By sending you agree that we may share your request with a suitable manufacturer, installer or supplier. See our privacy policy.

Get a free quote