Get a quote
Free tool

Burglar bar spacing calculator

Enter the opening, the bar size and the largest gap you want. See how many bars fit, the real gap between them, a drawing to scale, and how much steel it takes.

1.2 x 1.0 m
Steel burglar bars with even spacing on a house window
Bar layoutEvenly spaced, no gap over your limit
Vertical bars0

Steel weights are for mild steel at 7,850 kg/m³, before offcuts. Allow about 10% extra for cutting.

The gap between burglar bars is what stops someone climbing through, so it matters more than the bar thickness. This calculator spaces the bars evenly across the opening so no gap is wider than the limit you set, and adds up the steel for a cutting list or to check a quote.

What gap to use

Most South African installers keep the clear gap between bars at 100 to 125 mm. At 100 mm a small child's head cannot pass between the bars, which is the same 100 mm rule the building regulations use for balustrades. Wider gaps save steel but make it easier to reach in and to spread the bars with a jack. For windows that open outwards, also check that the bars leave room for the handle and stay.

How the numbers are worked out

The calculator takes the inside width of the frame, then finds the smallest number of vertical bars that keeps every gap at or below your limit: bars = (inside width minus the gap) divided by (gap plus bar thickness), rounded up. It then spreads them evenly, so the real gap is usually a little smaller than the limit. Horizontals are spaced the same way down the height. Steel weight uses 7,850 kg per cubic metre for mild steel.

Bar sizes in common use

  • 12 mm square bar in a 25 x 5 mm flat bar frame: the standard house window bar.
  • 16 mm round or square bar: heavier, for ground floors, farms, shops and offices.
  • 10 mm square bar: light work and decorative panels; easier to cut.
  • 25 x 5 mm or 30 x 6 mm flat bar: frames and horizontals; flat bar is also used on its own for a modern look.

Ask for the bar and frame sizes on every quote; see burglar bars for more.

Frequently asked questions

What is the standard gap between burglar bars?
There is no single legal size for window bars, but 100 to 125 mm clear between bars is the norm in South Africa. Use 100 mm where small children live or where a gap faces a stair or a balcony.
Should burglar bars be horizontal or vertical?
Mostly vertical, with one or two horizontal flat bars to stop the verticals being bent apart and to stop climbing. Long horizontal bars on their own act like a ladder.
How thick should burglar bars be?
12 mm square bar is the common minimum for a house; 16 mm is better on ground floors and remote properties. The fixing matters as much: anchor bolts into brick or concrete, not plugs and screws.
Can I use this for a security gate?
Yes, for an open-bar gate the same spacing rules apply. Enter the gate leaf size and use 100 mm gaps. For the gate itself see slamlock security gates.

More free tools

Get a free security door quote

Fill in the measuring sheet: each door, gate or window with its width and height in millimetres, the finish you want and how it should be fixed. Manufacturers, installers and locksmiths who work in your area quote you directly. Free, no obligation.

Measuring sheetSheet no. assigned when sent

Openings

No.Door, gate or windowWidth mmHeight mmQtyRemove
O1
O2
Up to 12 lines. Measure inside the frame; not sure? Leave the size empty.

Add a width and height in millimetres to see the openings to scale, the total area and a rough price.

Options and problems

Free and no obligation. By sending you agree that we may share your request with a suitable manufacturer, installer or supplier. See our privacy policy.

Get a free quote