Get a quote
Free tool

Burglar bar cost calculator

Add your windows room by room, choose the kind of bars and see the square metres and a rough price, supplied and fitted. Then send the list to installers near you.

1.2 x 1.0 m
Black steel burglar bars fitted on the windows of a South African house
Estimate sheet2026 rates, supplied and fitted
Room or windowTypeWidth mmHeight mmQtyRemove
Sizes in millimetres, measured across the opening.
Extras
Rough totalR0

A rough 2026 guide for standard work, not a quote. Your installer measures and confirms on site.

Burglar bars are priced by area, so the quickest way to a budget is to measure every window and add them up. Most houses have far more window area than people expect: a three-bedroom house is often 12 to 18 square metres once the lounge and kitchen are counted.

Measuring your windows

Measure the opening the bars will cover, not the glass. For bars fitted inside the reveal (the usual way on brick houses) measure brick to brick at the top and bottom and take the smaller figure. For bars fixed on the face of the wall or onto an aluminium frame, measure the outside of the frame. Write it as width x height in millimetres, so 1,200 x 1,000 is a common bedroom window. If you have several windows of the same size, enter one line and set the quantity.

Which bars to choose

  • Standard steel bars are the cheapest and strongest per rand: square or round bars in a flat-bar frame, powder coated.
  • Bars for aluminium windows are fixed so they don't crack the frame and often sit on the inside; see aluminium window burglar bars.
  • Clear bars cost two to three times as much but keep the view; see clear burglar bars.
  • Decorative designs such as cottage pane, scrolls and rings add steel and welding; see burglar bar designs.

Plan an escape route

Bars on every window can trap people in a fire. Plan at least one window in each bedroom with an opening section or a quick-release frame that opens from the inside with a key kept nearby. Tick the escape option in the calculator to price it, and say which windows need it on the measuring sheet.

Frequently asked questions

How much do burglar bars cost per square metre?
Roughly R550 to R1,400 per m² for standard steel bars, R650 to R1,700 for bars made for aluminium windows, R900 to R2,200 for decorative designs and R1,600 to R3,400 for clear bars, supplied and fitted in 2026. See burglar bar prices.
What does one window cost?
A small bathroom window usually comes in at the minimum charge of about R450 to R650. A 1,200 x 1,000 mm bedroom window in standard steel is roughly R700 to R1,700, and a large lounge window of 2,400 x 1,500 mm about R2,000 to R5,000.
Is it cheaper to do the whole house at once?
Usually, yes. One measure, one batch of powder coating and one fitting trip spread the fixed costs, and many installers drop the rate per m² for a full house.
Do burglar bars need to be galvanised?
Near the coast, galvanising under the powder coat is worth the extra 12 to 18 percent. Inland, a good powder coat on clean steel lasts many years if scratches are touched up.

More free tools

Get a free security door quote

Fill in the measuring sheet: each door, gate or window with its width and height in millimetres, the finish you want and how it should be fixed. Manufacturers, installers and locksmiths who work in your area quote you directly. Free, no obligation.

Measuring sheetSheet no. assigned when sent

Openings

No.Door, gate or windowWidth mmHeight mmQtyRemove
O1
O2
Up to 12 lines. Measure inside the frame; not sure? Leave the size empty.

Add a width and height in millimetres to see the openings to scale, the total area and a rough price.

Options and problems

Free and no obligation. By sending you agree that we may share your request with a suitable manufacturer, installer or supplier. See our privacy policy.

Get a free quote